|
Features
of Side Roll
Side Roll: One
of the safest and most reliable mechanized sprinkler irrigation systems
available |
|
The Irriline Side Roll
is easy to understand, operate and maintain, and there
is no need for complex technical support for this mechanized sprinkler
irrigation system.
|
|
Pipe
Rigidly coupled high
quality 100 mm (4") diameter extruded aluminum tubes, mounted on large wheel
with the pipe acting as an axel. Pipes are about 12 m (40') long and 1.8 mm
(0.071") thick. In each side of the drive unit, pipes are about 6 m (20')
long and 2.2 mm (0.087") thick, providing more strength and stability. The
system can be up to 490 m (1608') in length, but variation in length can be
ordered. Our heavy-duty extruded aluminum pipes meet or exceed ASAE
(American Society of Agricultural Engineers) standards for aluminum
sprinkler irrigation tubing (S263.3). |
 |
|
Mover
Unit
The Irrican Motoroll is
repositioned by a hydraulic power mover. The mover unit, located in the
center of the aluminum line, combines an 8 HP air-cooled gasoline engine,
hydraulic system with motors, hoses and gears, and heavy duty frame and high
quality steel chain for easy movement and alignment.
|
 |
|
Sprinklers
Sprinklers, from the
premier manufacturers of the industry, are mounted on self-levelers, to keep
the sprinklers always right side up, and have protection cups to prevent
clogging.
|
 |
|
Couplers
made of high quality
die cast aluminum, and designed for easy and quick line assembly and take
down.
|
 |
|
Drain Valves
Located on each female coupler,
drain valves automatically drain the pipe when the water is turned off, and
seal when the water is turned on.
Note: The system
must be completely drained before repositioning. |
|
|
End Plug
One-piece die cast flush plug
with splash guard. It is easy to clean any debris and trash with the manual
control valve. |
|
|
Wheels
heavy-duty hot dip galvanized
steel wheels with 3 mm cleats provide great strength and easy movement.
There are different sizes to choose from: 1.47 m (58'), 1.93 m (76"), and
2.85 m (112") in diameter, providing more flexibility for various crop
clearances. |
 |
|
Flexible
Hose
Special long-lasting 100
mm x 6 m (4" x 20') UV-resistant flexible hose is used to connect the
Motoroll to the supply line (mainline). Both end-feed and center-feed are
available, depending on the location of the supply line and the length of
the system. |
|
|
Stabilizer
Strong stabilizers are
available for the long term parking of the Motoroll and windy conditions
(optional).
|
|
|
To Top
|
